Description
WorkAnt CNC Full Kit
The WorkAnt CNC Full Kit have been version 2.3 after many big changes and upgrades.Expecially the latest Version add Tingle Tensioning System which solve the problem of whipping when for long length or faster speed
This Full Kit Includes:
* WorkAnt CNC Mechanical Kit
* 4 x Nema23(2.45N.m) Stepper Motors
* Cable Drag Chain Bundle
* Wiring Cable Kit
* Mach3 or GRBL or OFFLINE or DSP or CNC USB Controller Bundle
*1.5kW/2.2kW Air Cooled or Water Cooled Spindle Bundle
* All Extrusions are M5 Tapped as where it is necessary
Specs of Nema 23 Stepper Motor:
* NEMA 23
* Shaft Size: 1/4″
* Step Angle: 1.8°
* Holding Torque: 2.45N.m
* Rated voltage: 3.6V
* Rated current:3A
Spindle Bundle Options:
Specs of 1.5 kW Air/Water Cooled Spindle
* 1.5kW Air Cooled Spindle Spec: φ 65 x 188mm
* 1.5kW Water Cooled Spindle Net weight: 3.5KW
* 1.5kW Water Cooled Spindle Spec: φ 65 x 210mm
* Power: 1.5 kW
* Voltage: 220 ~250 V or 110 V
* Frequency: 400 Hz
* Speed: 8000-24000 R/min
* Air/Water Cooling
* Run-out off: less than 0.005 mm
* Grease Lubrication
* VFD Inverter 1.5 kW 220 V or 110 V
* Collet: ER11
Specs of 2.2 kW Air/Water Cooled Spindle
* Spindle Spec:φ 80 x 210mm/φ 80 x 235mm
* Power: 2.2 kW
* Voltage: 220 ~250 V or 110 V
* Frequency: 400 Hz
* Speed: 0-24000 R/min
* Water Cooling
* Run-out off: less than 0.005 mm
* Grease Lubrication
* VFD Inverter 2.2KW 110V or 220V
* Collet: ER20
* Sizes: 1mm, 2mm, 1/8″, 4mm, 5mm, 6mm, 1/4″, 7mm, 8mm, 9mm, 10mm, 11mm, 1/2″, 13mm
Cable Drag Chain bundle
The Cable Drag Chain bundle contains all the hardware for mounting Cable Drag Chains on your QueenBee ,WorkAnt,QueenBee or other CNC machine to help with cable management.
Reviews
There are no reviews yet.