750x750mm QueenAnt PRO CNC Kit

Description

QueenAnt PRO CNC Kit – 7575 V2 with 1610 Ball Screw, 4-Axis for Wood Carving & Engraving

Build a high-precision machine with this QueenAnt PRO CNC Kit. Featuring 1610 ball screw drive and a 4-axis configuration, this kit delivers smoother motion, higher accuracy, and greater rigidity for wood carving, engraving, and routing. Whether you’re upgrading an existing machine or building a new one, this kit gives you the foundation for a capable CNC system.

The QueenAnt PRO CNC Kit is designed for serious woodworking. The 4-axis setup supports rotary attachments for cylindrical carving, while ball screws reduce backlash and maintain accuracy under load. The rigid frame keeps vibration low, so you get clean cuts and consistent results across large workpieces. The 1610 ball screws provide fast travel with precise positioning, making this kit suitable for both fine detail work and heavier cutting tasks.

This QueenAnt PRO CNC Kit includes frame, motion system, motors, and hardware. Just add your controller, spindle, and power supply. With a 7575 frame size, it’s ideal for sign-making, furniture parts, and custom wood projects. The kit is designed for straightforward assembly with standard tools, and all mounting hardware is included. Whether you’re upgrading an existing machine or building a new one, this QueenAnt PRO CNC Kit delivers the precision and reliability you need.

Key specs:

• Model: QueenAnt PRO V2

• Size: 7575

• Drive: 1610 Ball Screw

• Axes: 4-Axis

• Applications: Wood Carving, Engraving, Routing

• Type: Full CNC Kit

• Compatibility: Woodworking, Sign-making, DIY

Whether you’re upgrading an existing machine or building a new one, this QueenAnt PRO CNC Kit delivers the precision and reliability you need for your CNC projects.

Drive characteristics:
Model:HBS57
Type: DSP Closed loop stepper drive
Maximum peak current: 5A
Impulse response frequency: 200KHz
Micro-stepping driver: 2-256ppr
Voltage: DC24-48V
Protective function: Over voltage, over current, tracking error, over proof
Signal input Compatible:5-24V signal (Don’t need a resistor)
Control Way: 32 bit DSP Vector Closed Loop
Advantage: No step to lose, Low noise, little vibration and high efficiency, low heat

Motor electric parameter:
Shaft Diamater:8mm
Step angle/phase: 1.8 Degree
Hold torque: 2.45N.m/3.6N.M
Encoder: 1000line
Rated voltage/current: 4.2A
Resistance: 0.85ohm
Inductance: 3.6mH
Class of insulation: B

In many cases, if cables are directly exposed to the outside, they will soon wear out, become damaged, or be compromised due to various factors, and may even pose safety hazards. This cable drag chain system is designed to protect the wiring of the CNC machine. It not only extends the service life of the cables but also offers many advantages. It is a dynamic cable protection system, and each individual link of the cable drag chain can be opened—a feature not available in smaller drag chains. Furthermore, if needed, you can shorten or lengthen the drag chain by removing or adding links.

1.5 KW Air/Water Cooled Spindle
– Net weight (1.5kW Air-Cooled): 2.6kg
– Spec(1.5kW Air-Cooled): φ 65 x 205mm
– Net weight(1.5kW Water-Cooled): 4.2kg
– Spec(1.5kW Water-Cooled): φ 80 x 205mm
– High Speed-7 series 4 Bearings
– Power: 1.5 kW
– Voltage: 220 ~250 V or 110 V
– Frequency: 400 Hz
– Speed: 8000-24000 R/min
– Air/Water Cooling
– Run-out off: less than 0.005 mm
– Grease Lubrication
– VFD Inverter 1.5 kW 220 V or 110 V
– Collet: ER11 (15pcs/set, size from 1mm~7mm)

YY PI-GRBLHAL

Industrial GRBLHAL CNC controller kit, open-source industrial-grade firmware, high step rate, reliable for DIY CNC routers, laser
engravers and industrial small machining equipment.

YY ESP32S-GRBL

WiFi + Bluetooth GRBL CNC controller kit, wireless remote control by phone/tablet, supports USB connection, ideal for laser
engraving, desktop CNC and DIY motion projects.

OFF-LINE

Offline CNC motion controller kit with touch screen, built-in independent system, reads G-code via U-disk, works without computer
for stable standalone engraving & milling tasks.

MK4-V

4-axis USB CNC motion control kit compatible with Mach3 software, high pulse frequency, supports stepper & servo motors, stable
PC-based control for CNC router, milling and engraving machines.

DSP A11

Handheld offline CNC controller, no computer required, U-disk reading, power-off resume, breakpoint memory, simple operation for
industrial routers.

EC500

Ethernet Mach3 CNC controller kit, strong anti-interference, long-distance stable communication, supports 3–6 axis, stepper &
servo drive, ideal for high-precision engraving and milling.

QueenAnt Property

All Axis use Big Diamater Ultra High Precise G7 Grade 16mm Grinding Ball Screw,One upgrade in place for your machine,It is not recommended to use a smaller diameter Ball Screw,otherwise you may need to upgrade your machine twice or more and pay more cost.The large diameter ball screw allows your machine to support a maximum length of 4 meters！

The luxurious Flat aluminum plate set up to 12mm thickness enhances the stability, rigidity and mechanical performance of the whole machine again!