Description
500x500mm Lead CNC Wood Router Full Kit
500x500mm Lead CNC Wood Router Full Kit, The Lead CNC machine, originally designed by Mark Carew, is a powerful, precise, and easy-to-assemble CNC router. Built on C-Beam, V-Slot, Xtreme Solid V-Wheels, and TR8x8(P2) lead screws, it is sturdy, accurate, and reliable. It can precisely cut foam, wood, plastics, aluminum, and more, achieving an accuracy of 0.05–0.10 mm or even higher.
This kit has a few minor differences from Mark Carew’s original design. Most notably, it uses black corner brackets instead of cast brackets to increase rigidity.
The cable drag chain bundle includes all the necessary hardware for installing drag chains on your WorkBee, Ox CNC, or other CNC machines, helping to keep your cables neatly organized. Additionally, the Mach3 (NVUM) and GRBL controller bundles are perfect for CNC routers.
Compatible Material for Cutting/Milling/Engraving:
Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam
Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam
This Lead CNC Full Kit Includes:
* Lead CNC Mechanical Kit
* 4 x Nema23( 1.26N.m) Stepper Motors
* Cable Drag Chain Bundle
* Wiring Cable Kit
* ESP32S-GRBL or PI-GRBLHAL Controller Bundle
* 1.5kW Air Cooled or Water Cooled Spindle Bundle
* Lead CNC Mechanical Kit
* 4 x Nema23( 1.26N.m) Stepper Motors
* Cable Drag Chain Bundle
* Wiring Cable Kit
* ESP32S-GRBL or PI-GRBLHAL Controller Bundle
* 1.5kW Air Cooled or Water Cooled Spindle Bundle
* All Extrusions are M5 Tapped as where it is necessary
* A PDF Assembly Manual is available by email
* A PDF Assembly Manual is available by email
Specs of Nema 23 Stepper Motor:
* NEMA 23
* Shaft Size: 1/4″
* Step Angle: 1.8
* Holding Torque: 1.26 N.m
* Rated voltage: 3.36 V
* Rated current: 2.8 A / 3ASpecs of 1.5 kW Air/Water Cooled Spindle:
* 1.5kW Air Cooled Spindle Net weight: 2.6kg
* 1.5kW Air Cooled Spindle Spec: φ 65 x 205 mm
* 1.5kW Water Cooled Spindle Net weight: 4.2kg
* 1.5kW Water Cooled Spindle Spec: φ 80 x 205 mm
* Power: 1.5 kW
* Voltage: 220 ~250 V or 110 V
* Frequency: 400 Hz
* Speed: 8000-24000 R/min
* Air/Water Cooling
* Run-out off: less than 0.005 mm
* Grease Lubrication
* VFD Inverter 1.5 kW 220 V or 110 V
* Collet: ER11 (15pcs, size from 1 mm to 7 mm)
* NEMA 23
* Shaft Size: 1/4″
* Step Angle: 1.8
* Holding Torque: 1.26 N.m
* Rated voltage: 3.36 V
* Rated current: 2.8 A / 3ASpecs of 1.5 kW Air/Water Cooled Spindle:
* 1.5kW Air Cooled Spindle Net weight: 2.6kg
* 1.5kW Air Cooled Spindle Spec: φ 65 x 205 mm
* 1.5kW Water Cooled Spindle Net weight: 4.2kg
* 1.5kW Water Cooled Spindle Spec: φ 80 x 205 mm
* Power: 1.5 kW
* Voltage: 220 ~250 V or 110 V
* Frequency: 400 Hz
* Speed: 8000-24000 R/min
* Air/Water Cooling
* Run-out off: less than 0.005 mm
* Grease Lubrication
* VFD Inverter 1.5 kW 220 V or 110 V
* Collet: ER11 (15pcs, size from 1 mm to 7 mm)
Size:1mm/1.5mm/2mm/2.5mm/3mm/3.175mm/3.5mm/4mm/4.5mm/5mm/5.5mm/6mm/6.35mm/6.5mm/7mm
Please note:
* MDF Working Table and Drill Bits are Not included with this kit.
* MDF Working Table and Drill Bits are Not included with this kit.
Two Spindle Bundles For You To Choose: Air Spindle Bundle or Water Spindle Bundle
The Air Spindle Bundle: Advantages:Lighter weight; no need for radiators, water pumps, thermostats, coolant, or hoses. Disadvantages: Cannot warm up quickly, nor maintain a constant engine temperature. Performance and emissions are affected in extreme climates, whether very cold or very hot. Additional fuel is required for proper operation.
The Water Spindle Bundle Advantages:Warm up faster than air-cooled designs and better maintain engine temperature, which helps preserve engine performance and emissions. Disadvantages: Increased engine weight, as well as the added weight from cooling system components such as radiators, water pumps, coolant, and hoses.
Reviews
There are no reviews yet.